Rogue Customs Marine custom starboard inset panel for 226 Traveler - Printable Version

+- Sea Fox Boat Owners (https://seafoxboatowners.com)
+-- Forum: Welcome To Sea Fox Boat Owners Group (https://seafoxboatowners.com/forumdisplay.php?fid=1)
+--- Forum: How-To/DIY (https://seafoxboatowners.com/forumdisplay.php?fid=5)
+--- Thread: Rogue Customs Marine custom starboard inset panel for 226 Traveler (/showthread.php?tid=27)

---

Rogue Customs Marine custom starboard inset panel for 226 Traveler - McQueen - 04-14-2022

Just a quick write up for installation of the Rogue Customs Marine custom starboard inset panel for 226 Traveler.  This panel replaces the mesh screen cover for the hard top compartment making the space a lot more versatile and makes it look much better.

Installation can be accomplished by your self in about an hour and is pretty straight forward.

Start by overlaying your factory cover on top of the new cover.
Then mark and  drill the mounting holes in the new cover (see picture for drill bit size)
Then counter sink the holes.
If you are by yourself run two cargo straps, port and starboard from the horizontal fore and aft hard top bars see PIC 
Place the starboard replacement panel on the straps
Tighten the straps to lift panel into place
Install screws on the fore and aft, port and starboard.
Through bolt (screw and nut) the 8 corner holes and your done.

---

RE: Rogue Customs Marine custom starboard inset panel for 226 Traveler - SFBOG_Admin - 04-28-2022

Thanks for taking the time to post Doug!

---